Home Product Directory Topics Note Pad electronica 2008 EuMW 2008 Back Issues RF Blogs Military Electronics Subscribe News Online News Design Features Web Seminars PartFinder Whitepapers Microwave Legends Newsletter WebConnect RF Design  RSS


PART SEARCH :
GlobalSpec - The Engineering Search Engine


Related Resources

  
Reprints   Printer-Friendly    Email this Article    RSS        Font Size     What's This?

[Products]
VCO Modules Exhibit –95-dBc/Hz Phase Noise

Nancy Friedrich  |  ED Online ID #15110 |  March 2007

To satisfy test and measurement, military, microwave-radio, and other applications from 4 to 12.5 GHz, three wideband voltage-controlled-oscillator (VCO) modules have been spawned. The HMCC028, HMC-C029, and HMCC030 modules offer output frequency coverage from 4 to 8 GHz, 5 to 10 GHz, and 8 to 12.5 GHz, respectively. The devices exhibit SSB phase-noise performance as low as –95 dBc/Hz at 100-kHz offset. Output power is as high as +21 dBm. Thanks to internal voltage regulation, the VCO modules can operate from a single supply between +8 and +15 VDC while consuming less than 200 mA of current. The single-ended RF outputs are matched to 50 Ω. The Vtune ports accept analog tuning voltages from 0 to +13 VDC. In addition, an integrated buffer amplifier provides increased output power and low frequency pulling characteristics. The modules utilize InGaP GaAs HBT technology. P&A: stock.

Hittite Microwave Corp., 20 Alpha Rd., Chelmsford, MA 01824; (978) 2503343, FAX: (978) 250-3373, Internet: www.hittite.com





Reprints   Printer-Friendly    Email this Article    RSS        Font Size     What's This?




POST YOUR COMMENTS HERE
Name:

Email:
Rate this article:

 less useful more useful 
1
2
3
4
5

Your Comments: